George Huang's Homepage
 Teaching Research Scholarships Autom@Facebook

　 George Q. Huang,
BEng, PhD, CEng, ASME Fellow, HKIE Fellow, IET Fellow, IIE Member
Professor,
黄国全 教授
Department of Industrial and Manufacturing Systems Engineering,
Faculty of Engineering
The University of Hong Kong,
Room 8-13, Haking Wong Building,
Pokfulam Road,
Hong Kong

Tel: (852)28592591
Fax: (852)28586535
EMail: gqhuang@hku.hk

George Q. Huang is Professor in Department of Industrial and Manufacturing Systems Engineering, The University of Hong Kong. He gained his BEng and PhD in Mechanical Engineering from Southeast University (China) and Cardiff University (UK) in 1983 and 1991 respectively. He is a Chartered Engineer (CEng), Fellow of ASME, HKIE and IET, and Member of HKLA and IIE. He is currently a member of Engineering Panel of Hong Kong SAR Research Grant Council (HKSAR RGC).

Professor Huang has conducted research projects in the areas of Industrial Informatics, Collaborative Product Design & Manufacturing and Cross-Border Logistics & Supply Chain Management. He has published extensively, including two monographs and two edited reference book, and nearly 300 technical papers, half of which have appeared in refereed journals. Many publications in the field have received a good total number of citations and several individual papers have been among Top 10 Most Cited papers (Business & Management and Decision Sciences) in several journals.

Professor Huang's research has received substantial financial supports (totaling HK$20M since joining HKU in 1997) from Hong Kong Research Grant Council (HKRGC), Hong Kong University Research Committee (HKURC) and Teaching Development Grants (TDG), and Hong Kong Innovation and Technology Fund (ITF) in close collaboration with major companies in relevant industrial sectors. He has led his team and conducted R&D activities. Several outcomes have been used in companies for daily operations.

Professor Huang has been serving on editorial boards of a number of international journals. He is Editor for Asia Pacific for International Journal of Computer Integrated Manufacturing, Area Editor for Business & Management for International Journal of Research in Engineering Design, Associate Editor for Journal of Intelligent Manufacturing, and Senior Editor for Journal of the Chinese Institute of Industrial Engineers.

Professor Huang received 2007 First-Class Natural Science Award from Chinese Ministry of Education on "Service-oriented manufacturing execution in extended enterprises", Outstanding Young Researcher Award (Overseas) from Natural Science Foundation of China in 2006 and The University of Hong Kong Outstanding Young Researcher Award in 2001.
　

Published Books

  1. Blecker, T, Huang, GQ (Editors) (2008), RFID in Operations and Supply Chain Management, Schmidt (Erich), Berlin, 523 pages.

  2. Huang, GQ, Mak, KL (2003) Internet Applications in Product Design and Manufacturing, Springer-Verlag. (250+ pages)

  3. Huang, G Q (Editor) Design for X - Concurrent Engineering Imperatives, Chapman & Hall in the Book Series of Design and Manufacturing in 1996, app. 500 pages

  4. Huang, G Q; Brandon, J A (1993) Cooperating Expert Systems in Mechanical Design, Research Studies Press, England

Selected Publications

  1. Huang G.Q., Zhang, Y.F., Jiang, P.Y., 2007, RFID-Based Wireless Manufacturing for Walking-Worker Assembly Islands with Fixed-Position Layouts, International Journal of Robotics and Computer Integrated Manufacture, Vol 23/4 pp 469-477.

  2. Huang G.Q., Zhang, Y.F., Jiang, P.Y., 2007, RFID-Based wireless manufacturing for real-time management of job shop WIP inventories, International Journal of Advanced Manufacturing Technology, 7-8(36), 752-764.

  3. Huang, GQ., Wright, PK., Newman, ST., 2007, Wireless Manufacturing: a literature review, recent developments and case studies, International Journal of Computer Integrated Manufacturing, Volume 22, Issue 7 July 2009 , pages 1 - 16.

  4. Huang G.Q., Zhang, Y.F., Chen, X., Newman, ST., 2008, RFID-Enabled Real-Time Wireless Manufacturing for Adaptive Assembly Planning and Control, Journal of Intelligent Manufacturing, Vol 19, No 6, 701-713

  5. Zhang, Y.F., Jiang, P.Y., Huang G.Q., 2008, RFID-Based Smart Kanbans for Just-In-Time Manufacturing, International Journal of Materials and Product Technology, Vol. 33, No. 1-2, 170-184.

  6. Huang G.Q., Zhang X. and Lo V.H.Y., Integrated configuration of platform products and supply chains for mass customization: a game-theoretic approach, Journal of IEEE Transactions on Engineering Management, 2005 

  7. Huang G.Q., Zhang X. and Liang L., Towards integrated optimal configuration of platform products, manufacturing processes, and supply chains, Journal of Operations Management, 2005, 23, 267-290 

  8. Huang G.Q., Simpson T.W. and Pine II B.J., The power of product platforms in mass customization, International Journal of Mass Customization, 2005, 1(1), 1-13 

  9. Huang G.Q., Lau S.K. and Mak K.L., The impacts of sharing production information on supply chain dynamics: a review of the literature, International Journal of Production Research, 2003, 41(7), 1483-1517 

  10. Huang G.Q., Lau S.K., Mak K.L. and Liang L., Distributed supply-chain project rescheduling: part I: Impacts of information-sharing strategies, International Journal of Production Research, Volume 43, Number 24, 15Dec2005, 5107 - 5129.

  11. Huang G.Q., Lau S.K., Mak K.L. and Liang L., Distributed supply-chain project rescheduling, part II - Distributed affected operations rescheduling algorithm, International Journal of Production Research, Volume 44, Number 1, January 2006 Pages: 1 - 25.

  12. Lau S.K., Huang G.Q., Mak K.L. and Liang L., Distributed project scheduling with information sharing in supply chains: part I - An agent-based negotiation model, International Journal of Production Research, Volume 43, Number 22, November 2005 Pages: 4813 - 4838.

  13. Lau S.K., Huang G.Q., Mak K.L. and Liang L., Distributed project scheduling with information sharing in supply chains: part II - Theoretical analysis and computational study, International Journal of Production Research, Volume 43, Number 23, December 2005 Pages: 4899 - 4927.

  14. Lau S.K., Huang G.Q., Mak K.L. and Liang L., An agent-based information model for distributed supply chain scheduling, IEEE Transactions on Systems, Man, and Cybernetics, Part A, 2006

  15. Lau S.K., Huang G.Q. and Mak K.L., Impact of information sharing on inventory replenishment in divergent supply chains, International Journal of Production Research, 2004, 42(5), 919-941 

  16. Huang G.Q., Qu T., Cheung D.W.L. and Liang L., Extensible multi-agent system for optimal design of complex systems using analytical target cascading, International Journal of Advanced Manufacturing Technology , 2006 

  17. Huang G.Q. and Mak K.L., Brokering the customer-supplier partnership in product design and realization over the World Wide Web, IIE Transactions, 2003, 35(4), 369-378 

  18. Huang G.Q., Yee W.Y. and Mak K.L., Development of a web-based system for engineering change management, International Journal of Robotics and Computer Integrated Manufacture, 2001, 17(3), 255-267 

  19. Huang, GQ, Mak, KL (2001) “Web-integrated manufacturing: Recent developments and Emerging issues”, International Journal of Computer Integrated Manufacture, 2001, 14(2): 3-13.

  20. Huang, GQ, Mak, KL (1999) “Web-Based Morphological Chart Analysis for Innovative Conceptual Design in Collaborative Product Development”, International Journal of Intelligent Manufacturing, Vol. 10, No. ¾, 267-278.

  21. Huang, GQ, Mak, KL (2000) “WeBid: A Web-Based Framework to Support Early Supplier Involvement in New Product Development”, International Journal of Robotics and Computer Integrated Manufacture, Vol. 16, 169-179.

  22. Huang, GQ, Mak, KL (1999) “Modelling the Customer-Supplier Interface over the World Wide Web to Facilitate Early Supplier Involvement in New Product Development”, Institution of Mechanical Engineers Proceedings, Part B Journal of Engineering Manufacture, 2000, B214(9): 759-769.

  23. Huang, GQ, Mak, KL (2001) “Issues in the Development and Implementation of Web Applications for Product Design and Manufacture”, International Journal of Computer Integrated Manufacture, 2001, 14(2): 125-135.

  24. Huang, GQ, Mak, KL (1999) “Web-Based Collaborative Conceptual Design”, Journal of Engineering Design, Vol. 10, No. 2, 183-194.

  25. Huang, GQ, Lee, SW, Mak, KL (1999) “Web-based product and process data modelling in concurrent ‘Design for X’”, International Journal of Robotics and Computer Integrated Manufacturing, Vol. 15, No. 1, 53-63.

  26. Huang G.Q., Web-based support for collaborative product design review, International Journal of Computers in Industry, 2002, 48(1), 71-88 

  27. Huang, GQ, Mak, KL (1999) “Web-Based Design for Manufacture and Assembly”, Computers in Industry: An International Journal, Vol. 38, No. 1, 17-30.

  28. Huang, G Q (1994) "Agent-based framework for cooperating concurrent engineering systems", International Journal of Artificial Intelligence with Engineering Applications, Vol 7, No 6, 678-681

  29. Huang, GQ, Huang, J, Mak, KL (2000) “Agent-based workflow management in collaborative product development on the Internet”, International Journal of Computer Aided Design, 2000, 32 (2): 133-144.

領袖領導衆人，促動別人自覺甘心賣力；老闆只懂支配別人，讓別人感到渺小。

Source: 一位知名香港商人
　

學術研究並沒有“對與錯”和“好與坏”之分，只有“多與少”和“深與淺”之別。

Source: 一名做得不多不少、不深不淺的學者
　

世界上最大的本事就是偷懶。

Source: 一個朋友
　

教授該上課就像人該吃飯；教授要做研究就像人要幹活。

Source: 不能不吃飯不幹活的教授
　

如果把xx地區的學者比作和尚...

大和尚忙於在人間化緣，小和尚留在廟裏念經。

Source: 一位院士的講座
　

Back to Top